Tektronix P7260 电压探头

特点与优点

• 6 GHz 带宽
• 可转换的衰减功能可提供高达 6 Vp-p 的动态范围
• 低输入电容 <0.5 pF
• 与TDS6604 TekConnect™ 示波器一起使用时，可在端部提供6GHz的系统带宽
• 小巧的端头和各种连接附件可连接和适应各种电路设计
• TekConnect 接口
  
  P7260 为高速电路设计人员，提供了他们期盼已久的高带宽，低电路负载，低噪声和精确的探测解决翻案。这种探头的端头部很小， 更合适探接物理空间狭小处的连接点和现代的细节距电路。
  
  P7260 是用铢化硅技术开发的探头。该探头配备有拨动开关，使用时可在1.5 Vp-p 或6 Vp-p 动态范围内随时转换。
  
  TekConnect 接口技术将探头智能提高到一个新高度，提供电源、自动化的比例系数和偏置电压设置功能。这种接口还为探头添加了自动带宽调整和电压测量功能。TekConnect 可将油效带宽和信号保真度扩展到18GHz。各式齐全的探头附件更有助于数字设计工程师探接各种各样的设备。
  
  Characteristics
  Designed for use with the TDS6604 oscilloscope - the system bandwidth is typically 6 GHz.
  
  Characteristic Specification 5x Specification 25x
  Type TekConnect Active, Single-ended
  Bandwidth
  
  (probe only, typical)
  6 GHz 6 GHz
  Rise Time (guaranteed) <75 ps <85 ps
  Input Capacitance (pF) <0.5 pF <0.5 pF
  Attenuation 5x 25x
  Dynamic Range ±0.75 V (1.5 Vp-p) ±3.0 V (6.0 Vp-p)
  DC Offset Range ±5 V ±5 V
  Input Resistance 20 kΩ at DC 20 kΩ at DC
  Maximum Nondestruct Voltage 30 V (DC plus peak AC)
  Compatible Oscilloscopes*1 TDS6604, TDS7404, all TekConnect oscilloscopes
  
  *1 Requires firmware version 2.1 or higher for TDS/CSA7000 Series.
  
  Ordering Information
  P7260
  6.0 GHz Active Probe, TekConnect interface.
  
  Includes: Probe tip accessories (see list), user manual, storage case.
  
  Warranty: One year.
  
  Service
  Opt. C3 - Calibration Service 3 Years
  
  Opt. C5 - Calibration Service 5 Years
  
  Opt. D1 - Calibration Data Report
  
  Opt. D3 - Calibration Data Report 3 Years (with Opt. C3)
  
  Opt. D5 - Calibration Data Report 5 Years (with Opt. C5)
  
  Opt. R3 - Repair Service 3 Years
  
  Opt. R5 - Repair Service 5 Years
  
  P7260 Included Accessories
  
  Description Quantity Part Number/Status
  Instruction Manual 1 each 071-0922-xx
  Probe Carry Case 1 each 016-1879-xx
  Y Lead Adapter 2 each 196-3434-xx
  3 in. Ground Lead 2 each 196-3437-10
  SMT KlipChip™ Adapter 2 each 206-0364-xx
  SureToe™ 1 set ST501
  
  (Replacement Pkg of 12)
  
  Accessory Reorder Sheet 1 each 001-1349
  Short Ground Pogo Pin
  
  (set of 8)
  1 set 016-1917-xx
  Square Pin Adapter
  
  (set of 4)
  
  (adapt to .100 in. centered square pins)
  1 set 016-1910-xx
  Color-coding Bands, 5 colors 1 set 016-1886-xx
  "L" Adapter (set of 2) 1 set 016-1913-xx
  Antistatic Wrist Strap 1 each 006-3415-xx
  Customizable Grounded Lead (set of 5) 1 set 196-3482-xx
  
  Recommended Accessories
  
  Description Quantity Part Number/Status
  TekConnect Calibration Adapter/Fixture/SW 1 each 067-0422-xx
  Probe Arm 1 each PPM100
  High-speed Deskew Fixture 1 each 067-0484-xx
  Probe Calibration Fixture 1 each 067-1456-xx
  IC Grabber (set of 2) 1 set 013-0309-xx
  
  
  
  Related Products
  
  80A03 - TekConnect Probe Interface Module for TDS/CSA8000 Series oscilloscopes.